28mm sculpt
Hellscape Basing Bits, Pack of 35
35 resin hellscape basing bits in 30 designs for 28mm and 32mm bases. Designed in-house, printed to order in Perth, unpainted.
- Secure checkout We accept Visa, Mastercard, American Express, PayPal, Apple Pay, Google Pay and Shop Pay
- Printed to order Printed in resin in Perth
- Free AU shipping On orders of $50 or more. Standard shipping is $11 below that.
- Dispatch Unpainted orders usually leave within 3–5 business days, with tracking.
- Damaged or faulty? We replace it or refund you in full.
About this piece
Fire and brimstone breaking out of the ground, for daemon armies, cultists and grimdark warbands: horned demon skulls, a hellfire brazier, a flaming fissure, a wall of fire and loose flame effects, with rune obelisks (one snapped), carved flagstones, an open grimoire and brimstone crystals.
- 35 pieces in 30 designs, the smaller ones two or more to a pack
- Sizes from 7 to 41 mm, for 28mm figures (they suit 32mm too)
- Ships with all 35 pieces on one sprue (the 4th picture), in unpainted grey resin: snip free, glue, texture and paint
- Our own design, printed to order in our Perth workshop
What you get
35 pieces in 30 designs, all on one sprue:
- Sigil flagstone: A cracked flagstone carved with a demonic sigil, one corner broken away.
- Demon horn: A huge ribbed horn torn from some great demon, lying on its side on the ground.
- Brimstone crystal cluster: A cluster of angular brimstone crystals jutting out in every direction.
- Horned demon skull: A horned demon skull without its jaw: deep eye sockets, a heavy brow ridge set with rows of short sharp spikes, a spiked crest along the top and two big ribbed horns curling out from its temples. A centrepiece for larger bases.
- Horned demon skull, broken horn: The horned demon skull with one of its big ribbed horns snapped off close to the skull, leaving a short stump: a jagged, stepped break with a splinter left standing at the rim, a chipped edge and a crack running back into the stump. The rest as the horned demon skull: deep eye sockets, spiked brow and crest, the other horn whole, no jaw.
- Rune flagstone: A cracked flagstone carved with a ring round a bold rune and four smaller runes at its corners, one corner cracked off and sunk.
- Forked brimstone crystals x2: Eight chunky brimstone crystals: two big points leaning apart in a V, three smaller ones round them, one snapped, and three short stubs at the foot.
- Open grimoire: A big grimoire lying open, a magic circle and runes carved across its pages and a ribbon bookmark (the Wizard's Study pack's open spellbook), for 32 mm and larger bases.
- Brimstone vent: A squat cone of cracked, crusted volcanic rock with a wide crater at its top and a smaller vent breaking out of its flank.
- Forged caltrop: A hand-forged iron caltrop: four twisted square spikes, each with one barb and a blunt-cut point, forge-welded in a hammered knot, one always pointing up.
- Sigil obelisk: A tapering stone obelisk carved with daemonic sigils, rising straight out of the ground.
- Chained shackles: A pair of heavy hand-forged iron shackles joined by a short chain, one shut and one swung open on its hinge: riveted, hammered and pitted cuffs with rolled rims, worn lips, chipped edges, lock boxes and keyholes, the chain hung from forged eyes.
- Chained demon heart: A monstrous demon's heart, bigger than a man's, ridged with muscle and veins, horned with bone growths and bound tight in two iron chains crossed in an X.
- Demonic pitchfork: A heavy forged pitchfork lying on the ground: a long iron-banded haft, three long, round tines with a barb each, a heavy collar and a horned medallion with a skull emblem on its socket.
- Rune obelisk: A tapering stone obelisk carved with bold runes, three to a face between two cut bands, two of its corners chipped, rising straight out of the ground.
- Broken rune obelisk: A rune-carved stone obelisk snapped part-way up at a jagged break, the stump still standing and its top lying on the ground beside it, both covered in bold runes.
- Hellfire brazier: A riveted iron fire bowl on three curved, clawed legs, brimming with hellfire: three plumes of hooked tongues rising out of the bowl and leaning one way as if wind-blown, with see-through windows where the tongues curl round. For 32 mm to 40 mm bases.
- Fire vent: A small cone of cracked volcanic rock with a tall plume of hellfire roaring up out of its crater, the fire towering over the rock.
- Burning skull x2: A big human skull standing on its own base of hellfire, uneven tongues of flame climbing from the base up both sides, fire pouring from its eye sockets and nose and a cluster of flames bursting from a crack at the back of the cranium.
- Flaming fissure: A crack torn in the ground with a row of hellfire roaring up out of it, its low broken lips the only rock: the fire is the piece.
- Wall of fire: A long, low band of hellfire, tongues of every height curling over into hooked points and drifting gently one way, to line a base edge.
- Flame-eyed skull x2: A human skull with hellfire streaming from its eyes and back over its temples.
- Rising flame: A tall plume of hellfire rising from a narrow foot and flaring as it drifts over to one side.
- Fire band: A long, low band of hellfire, its tall hooked tongues all drifting the one way.
- Fire trail: A trail of hellfire streaming low along the ground.
- Fire burst x2: A small, low burst of hellfire swept hard over to one side.
- Forked flame: A tall burst of hellfire splitting into two tongues as it leans over.
- Twisting flame: A plume of hellfire, three twisting tongues rising together from one foot.
- Flame tongue: A single tall, S-curved tongue of hellfire with two flicks.
- Short fire band x2: A short band of hellfire with three taller hooked tongues.
Designed by Scale Command
Scale Command
Our own designs, made in our Perth workshop: the Paint Hive range of honeycomb paint racks that join together, texture rollers for bases and terrain, plain resin bases and movement plates in the standard sizes, movement trays for ranked units and resin basing bits for 28mm (crystals, basalt, sandbags, skulls and more). We design each piece ourselves and print it to order.
Specs
The piece
- What you get
- 35 resin hellscape basing bits in 30 designs
- Material
- ResinResin vs filament: why we print it this way
- Arrives
- Printed, washed, cured and ready to prime
- Designer
- Scale Command
Shipping & returns
Shipping
Printed to order in our Perth workshop on our own printers. Usually ships within 3–5 business days, always with tracking. Free shipping in Australia on orders of $50 or more.
Shipping rates and timesReturns
Damaged or faulty? We replace or refund it. For change-of-mind returns, see our returns policy.
How returns workLicensing
Independent and unofficial
This is an original design from Scale Command, made for hobby use and display. It isn't made, licensed or endorsed by any game company, it isn't connected to any game, brand or ruleset, and we don't sell it as compatible with any particular game system. Where a game, trade mark, photo or file is mentioned for scale, inspiration or context, it belongs to its owner and we claim no rights in it.
Meet our designersReviews
New shop, first reviews on the way
Only customers who bought this model can leave a review. Every reviewer gets $5 off their next order, whatever they say; add a photo of your painted models or bases for $10 off. We want your honest experience, good or bad.
We opened on 6 November 2026, so the first reviews are still coming in. Reviews come only from customers who bought this model: we email you a link after your order is delivered.
Complete the set
Every pack is sculpted for 28mm and printed the same way.
-
New
-
New
-
New
-
New
Bits for every base
Crystals, basalt, sandbags, skulls, rocks and more, designed in-house for 28mm. Each pack ships on its print sprue in grey resin: snip the pieces free, glue them on, add sand and paint.
See all Basing Bits & Plates











































