28mm sculpt
Mushroom Basing Bits, Pack of 41
41 resin mushroom basing bits in 29 designs for 28mm and 32mm bases. Designed in-house, printed to order in Perth, unpainted.
- Secure checkout We accept Visa, Mastercard, American Express, PayPal, Apple Pay, Google Pay and Shop Pay
- Printed to order Printed in resin in Perth
- Free AU shipping On orders of $50 or more. Standard shipping is $11 below that.
- Dispatch Unpainted orders usually leave within 3–5 business days, with tracking.
- Damaged or faulty? We replace it or refund you in full.
About this piece
Mushrooms and toadstools for woodland and fairy-tale bases in fine detail, from single toadstools, morels and chanterelles to slender clusters, some rising from broken rocks. Plant them one by one, in a ring or in a clump.
- 41 pieces in 29 designs, the smaller ones two or more to a pack
- Sizes from 6 to 17 mm, for 28mm figures (they suit 32mm too)
- Ships with all 41 pieces on one sprue (the 4th picture), in unpainted grey resin: snip free, glue, texture and paint
- Our own design, printed to order in our Perth workshop
What you get
41 pieces in 29 designs, all on one sprue:
- Fly Agaric: A mature fly agaric: a broad cap with patchy, flattened warts, a lined margin with one tear, gills under the rim, a hanging ring and a scaly bulb at the foot.
- Parasol: A tall parasol: a broad, almost flat cap broken into flat, ragged scales round a whole centre, fine gills under a torn rim, a thick collar ring and a snakeskin stem.
- Penny Bun x2: A penny bun bolete: a broad suede cap, cracked in dry patches, a slug bite out of the rim, a sponge of pores underneath and a stout stem with a raised net at the top.
- Ink Cap x2: A tall common ink cap: a deeply pleated grey bell still closed round its slim stem, split and ragged at the rim where it turns to ink.
- Oyster Mushrooms x2: A clump of three oyster mushrooms: fan-shaped caps with wavy, split rims, rising in tiers from one short foot, gills running down into the stems.
- Shaggy Mane x2: A shaggy mane opening out: a lampshade cap shingled with curled-back scales of every size, the rim splitting and ragged where it turns to ink.
- Puffball x3: An old mosaic puffball: a squat, pear-shaped ball whose skin has crazed into rough, granular plates, a few flaked away, wrinkled into pleats at its foot.
- Twin Mushrooms: A pair of honey fungus grown from one foot: two caps, finely scaly in the middle and lined at the rim, the taller with a cottony ring, leaning apart.
- Tall Slender Mushroom: A rooting shank: a small flat cap with a low boss and radial wrinkles, its gills widely spaced, held up on a long, twisted, slender stem.
- Witch's Hat x2: A witch's hat: a pointed cone streaked with fibres, its flared rim torn in three places, on a twisted, fibrous stem.
- Brittlegill x2: A brittlegill: a broad cap with a shallow dip, grazed by slugs and bitten at the rim, its margin finely furrowed, crowded gills on a short, stout stem.
- Young Fly Agaric x3: A young fly agaric half open: a domed cap crusted with patchy warts, the torn veil hanging as a skirt below the first gills, a scaly bulb at the foot.
- Crooked Toadstool: A big old toadstool: a broad wavy cap tipped to one side, its skin cracked with age, two slug bites and a split in the rim, on a thick, bent stem.
- Scaly Wood Mushroom x2: A shaggy scalycap: a domed cap shingled with curled-up scales of all sizes, a ragged ring zone, and scales running down the stem below it.
- Pointed Bonnet Trio: Three slender mushrooms with pointed, bell-shaped caps finely striated to a thin, flared rim, on long wavy stems leaning apart from one slim, flared foot.
- Conical Cap Pair: Two slender mushrooms, one taller, with pointed conical caps finely striated to a flared rim, on thin stems that wave apart from one slim foot.
- Young Pointed Caps x2: A tight clump of five young mushrooms of mixed heights, their pointed caps still narrow and finely striated, on thin wavy stems from one compact foot.
- Slender Rock Mushrooms: Three slender mushrooms with domed, finely ribbed caps on tall, gently curving ribbed stems, rising from a heap of broken rocks.
- Rock Mushroom Pair: Two slender mushrooms with domed, finely ribbed caps on curving ribbed stems, one taller, growing from among broken rocks.
- Yellow Morel: A yellow morel: a broad egg-shaped head honeycombed all over with deep, irregular pits between sharp, wavy ridges, joined straight onto a short, thick, wrinkled stem that spreads into a lobed foot.
- Black Morel Trio: Three black morels of different sizes from one shared foot: blunt pine-cone heads with long pits between sharp ridges running base to tip, leaning apart on short, thick, wrinkled stems.
- Chanterelle: A mature chanterelle: one solid trumpet with no line between cap and stem, a shallow hollow funnel on top whose thick rim flares into wavy lobes with one split, and blunt, forked false-gill ridges running from the rim down onto a stem that tapers to the foot.
- Chanterelle Tuft: Three chanterelles of different sizes grown from one fused foot and splaying apart: each a solid trumpet with a shallow hollow funnel, a thick, wavy, lobed rim (the biggest one split) and blunt, forked false-gill ridges running down onto short, stout stems.
- Horn of Plenty Trio: Three horn of plenty trumpets grown from one fused foot: deep, narrow tubes, hollow far down inside, faintly veined outside with no gills, each flaring into a round, open mouth with a wavy, lobed rim; one tall, one leaning out, one short and young.
- Horn of Plenty Pair: Two horn of plenty trumpets leaning apart in a V from one fused foot, leaving an arched gap between them: deep hollow tubes with faint lengthwise veins and no gills, crinkled, lobed mouths rolled outward.
- Spike-Cap Cluster: A tuft of four slender mushrooms of different heights, their long, smooth, gently wavy stems gathering into one slim joined foot and fanning apart in a U. Each broad, low cap sweeps up in a concave curve to a small sharp point, with a thin rim and a cone of fine gills underneath, so from the side it looks like a spinning top. Stems 0.9 mm thick.
- Spike-Cap Pair: Two slender mushrooms joined at one slim foot and leaning apart in a V, one about two thirds the height of the other. Each broad, low cap sweeps up in a concave curve to a small point (tip rounded to 0.36 mm), with a thin rim and a deep cone of fine gills underneath, so from the side it looks like a spinning top. Long, smooth, gently wavy stems, 0.9 mm thick.
- Cup Fungus Cluster: Six shallow cup fungi of mixed sizes crowded together on one low fused base, each open cup tilted a different way, with thin wavy, crimped rims, one split.
- Ear Fungus Clump: Four to five thin, wavy, ear- and cup-shaped jelly-fungus lobes of mixed sizes overlapping like an open flower, with crimped, ruffled rims and soft veins, joined low at one small knot.
Designed by Scale Command
Scale Command
Our own designs, made in our Perth workshop: the Paint Hive range of honeycomb paint racks that join together, texture rollers for bases and terrain, plain resin bases and movement plates in the standard sizes, movement trays for ranked units and resin basing bits for 28mm (crystals, basalt, sandbags, skulls and more). We design each piece ourselves and print it to order.
Specs
The piece
- What you get
- 41 resin mushroom basing bits in 29 designs
- Material
- ResinResin vs filament: why we print it this way
- Arrives
- Printed, washed, cured and ready to prime
- Designer
- Scale Command
Shipping & returns
Shipping
Printed to order in our Perth workshop on our own printers. Usually ships within 3–5 business days, always with tracking. Free shipping in Australia on orders of $50 or more.
Shipping rates and timesReturns
Damaged or faulty? We replace or refund it. For change-of-mind returns, see our returns policy.
How returns workLicensing
Independent and unofficial
This is an original design from Scale Command, made for hobby use and display. It isn't made, licensed or endorsed by any game company, it isn't connected to any game, brand or ruleset, and we don't sell it as compatible with any particular game system. Where a game, trade mark, photo or file is mentioned for scale, inspiration or context, it belongs to its owner and we claim no rights in it.
Meet our designersReviews
New shop, first reviews on the way
Only customers who bought this model can leave a review. Every reviewer gets $5 off their next order, whatever they say; add a photo of your painted models or bases for $10 off. We want your honest experience, good or bad.
We opened on 6 November 2026, so the first reviews are still coming in. Reviews come only from customers who bought this model: we email you a link after your order is delivered.
Complete the set
Every pack is sculpted for 28mm and printed the same way.
-
New
-
New
-
New
-
New
Bits for every base
Crystals, basalt, sandbags, skulls, rocks and more, designed in-house for 28mm. Each pack ships on its print sprue in grey resin: snip the pieces free, glue them on, add sand and paint.
See all Basing Bits & Plates











































