28mm sculpt
Dwarven Ruin Basing Bits, Pack of 49
49 resin dwarven ruin basing bits in 36 designs for 28mm and 32mm bases. Designed in-house, printed to order in Perth, unpainted.
- Secure checkout We accept Visa, Mastercard, American Express, PayPal, Apple Pay, Google Pay and Shop Pay
- Printed to order Printed in resin in Perth
- Free AU shipping On orders of $50 or more. Standard shipping is $11 below that.
- Dispatch Unpainted orders usually leave within 3–5 business days, with tracking.
- Damaged or faulty? We replace it or refund you in full.
About this piece
The fallen halls of the dwarf holds, for fantasy bases: heavy, chunky stonework cut with crisp angular runes, knotwork and chevrons, chipped, cracked and weathered. The biggest piece is a 49 mm corner of dwarf palace floor, where big octagon slabs meet the hall tiles under an L of carved trim. Its trim carries a lattice band with hourglass waists, a squiggle-chain border and chunky rune blocks standing proud, ready to pick out in gold; the floor is slightly cracked and ships on its sprue in unpainted grey resin.
- 49 pieces in 36 designs, the smaller ones two or more to a pack
- Sizes from 7 to 49 mm, for 28mm figures (they suit 32mm too)
- Ships with all 49 pieces on two sprues (the 4th picture), in unpainted grey resin: snip free, glue, texture and paint
- Our own design, printed to order in our Perth workshop
What you get
49 pieces in 36 designs, all on two sprues:
- Forge anvil stone: A small dwarf forge anvil on its squared anvil block, the block carved round with runes, a running key and chevrons between incised rules.
- Dwarf king's head: The broken stone head of a dwarf king from a great statue, in a crested helm with a band of runes carved across it, snapped off at the neck.
- Stone fist and hammer: A huge stone fist snapped off a dwarf statue at the wrist, still gripping its war hammer, runes carved on the hammer head and across the sleeve.
- Fallen statue head: The fallen stone head of a bearded dwarf statue lying face up, two mason's runes cut into the joint face of its neck.
- Rune block x2: A squared stone block carved with a line of dwarf runes between incised rules, its edges chipped.
- Broken rune block x2: A tall rune-carved block snapped across one end, its runes running off into the break and a band of knotwork along its top.
- Studded door fragment x2: The broken corner of a stone door, an iron strap studded with nails running off its edge.
- Broken octagonal pillar: The snapped stump of an eight-sided hall pillar, a band of key pattern round its foot, knotwork higher up and runes running up its face.
- Fallen hall pillar: A great eight-sided hall pillar lying where it fell, snapped across the shaft, with its banded capital and a line of runes along its side. A centrepiece for 40-60 mm bases.
- Stepped lintel: A heavy door lintel with stepped ends lying on its back, a band of runes along its face and a running key along its edge, one end broken off.
- Studded stone door: A stone door leaf fallen flat, with nail-studded iron straps, a ring pull, a panel of runes and a corner broken off. For 40 mm bases.
- Square-cut steps: Three heavy square-cut steps from a hall stair, carved with runes, a running key and chevrons along the risers, broken off at one side.
- Hexagonal paving: Six hexagonal floor flags from a dwarf hall, one carved with a great rune in a hexagon, one cracked and one tipped up, the edge ragged where flags are missing.
- Ancestor-rune plaque: A standing memorial plaque to a clan ancestor, carved with a great crown rune and lines of runes in a framed panel, a top corner broken off.
- Dwarven keystone: A fallen arch keystone carved with a great rune on a raised boss, a line of runes and chevrons inside an incised border, chipped and cracked.
- Rune shield: A round stone shield from a fallen statue, its riveted rim broken, a ring of runes round a domed boss.
- Rune block pile x2: Three rune-carved blocks tumbled together, one fallen across the other two.
- Great rune column: A great eight-sided dwarf hall column standing alone on its stepped foot, banded with key pattern, knotwork and chevrons, runes running up every facet and one corner of its capital broken away. A centrepiece for 40-60 mm bases.
- Great forge anvil: A big chunky dwarf forge anvil with its horn, heel and waisted body carved with knotwork, runes and great runes, standing on its own carved anvil block. A centrepiece for 40-60 mm bases.
- Toppled rune pillar: A square rune pillar lying where it fell, knotwork along its top, runes along its side and a great rune on its end, snapped off at the other.
- Rune stair: Four steps of a hall stair with a carved side wall, runes and knotwork running up its slope and key patterns along the risers, the top corner broken away.
- Banded wall corner: The corner of a dwarf hold wall in great squared blocks, banded all round with chevrons, key pattern, runes and knotwork, its top courses broken away.
- Cracked rune block: A big squared block with two lines of runes in a sunk panel and knotwork along its top, split by a deep crack.
- Rune-stone shard: The lower half of a standing rune-stone, rows of runes in a ruled border running into its broken top, knotwork up one side.
- Great ale cask: A big squat dwarf ale cask as wide as it is tall, its bulging staves bound by six iron hoops and a band of runes burned round its belly. A centrepiece for 40-60 mm bases.
- Split barrel: A barrel split in two by a slanting blow, every stave snapped and splintered along the break, the top half lying against the bottom half, a clan rune branded on its side.
- Rune-branded barrel x2: A hooped wooden barrel with a clan rune in a ring branded into its side.
- Carved brazier: A carved stone brazier on an eight-sided stem, knotwork round its bowl, runes up its stem and a running key round its collar, heaped with lumps of charcoal.
- Chequered hall floor: Eight floor tiles from a dwarf hall laid in a chequer, knotwork tiles alternating with pyramid-faced ones, one tile cracked, one lifted and a corner tile missing.
- Broken tile floor: Six chequered hall floor tiles, knotwork and pyramid-faced, one cracked and the end tile snapped off along a rough break.
- Three floor tiles: Three hall floor tiles laid in an L, a knotwork tile between two pyramid-faced ones.
- Knotwork tile x3: A loose square floor tile carved with an interlaced knot inside a raised border, its edges chipped.
- Pyramid tile x3: A loose square floor tile with a plain bevelled pyramid face, its edges chipped.
- Broken knotwork tile x3: Part of a knotwork floor tile, snapped off along a rough break.
- Broken pyramid tile x3: Part of a pyramid-faced floor tile, snapped off along a rough break.
- Palace floor fragment: A broken slice of a dwarf palace floor where two floors meet at a corner of the carved trim, flat underneath: an L of chamfered trim, plain-edged on the hall tile side and with an extra stepped border strip on the octagon side carrying a chain of nested stepped Z links, carries a raised lattice band waisted like a row of hourglasses, a rune cartouche every 20 mm or so, and runs off two sides of the piece with both ends snapped; a low chamfered corner block with a great rune where the arms cross; inside the L the hall floor's knotwork and pyramid-faced tiles, sunk, outside it big octagon slabs two across and two rows deep with small squares set on the diagonal between them. A rounded, broken outline following the joints: the tiles round the edge worn, chipped and pitted, a few with chunks missing and one settled, those near the centre crisp; a few cracks; the lattice, chain links and cartouches stand proud for gold. A centrepiece for big bases, objectives and display bases.
Designed by Scale Command
Scale Command
Our own designs, made in our Perth workshop: the Paint Hive range of honeycomb paint racks that join together, texture rollers for bases and terrain, plain resin bases and movement plates in the standard sizes, movement trays for ranked units and resin basing bits for 28mm (crystals, basalt, sandbags, skulls and more). We design each piece ourselves and print it to order.
Specs
The piece
- What you get
- 49 resin dwarven ruin basing bits in 36 designs
- Material
- ResinResin vs filament: why we print it this way
- Arrives
- Printed, washed, cured and ready to prime
- Designer
- Scale Command
Shipping & returns
Shipping
Printed to order in our Perth workshop on our own printers. Usually ships within 3–5 business days, always with tracking. Free shipping in Australia on orders of $50 or more.
Shipping rates and timesReturns
Damaged or faulty? We replace or refund it. For change-of-mind returns, see our returns policy.
How returns workLicensing
Independent and unofficial
This is an original design from Scale Command, made for hobby use and display. It isn't made, licensed or endorsed by any game company, it isn't connected to any game, brand or ruleset, and we don't sell it as compatible with any particular game system. Where a game, trade mark, photo or file is mentioned for scale, inspiration or context, it belongs to its owner and we claim no rights in it.
Meet our designersReviews
New shop, first reviews on the way
Only customers who bought this model can leave a review. Every reviewer gets $5 off their next order, whatever they say; add a photo of your painted models or bases for $10 off. We want your honest experience, good or bad.
We opened on 6 November 2026, so the first reviews are still coming in. Reviews come only from customers who bought this model: we email you a link after your order is delivered.
Complete the set
Every pack is sculpted for 28mm and printed the same way.
-
New
-
New
-
New
-
New
Bits for every base
Crystals, basalt, sandbags, skulls, rocks and more, designed in-house for 28mm. Each pack ships on its print sprue in grey resin: snip the pieces free, glue them on, add sand and paint.
See all Basing Bits & Plates











































