Scrap & Machinery Basing Bits, Pack of 36

Scrap and wrecked machinery for sci-fi and post-apocalyptic wasteland bases: a wrecked engine, a torn-off robot arm, a junk heap, gears, girders, pipes and loose parts.

• 36 pieces in 23 designs, the smaller ones two or more to a pack
• Sizes from 7 to 25 mm, for 28mm figures (they suit 32mm too)
• Ships with all 36 pieces on one sprue (the 4th picture), in unpainted grey resin: snip free, glue, texture and paint
• Our own design, printed to order in our Perth workshop

36 pieces in 23 designs, all on one sprue:

• Robot arm: The torn-off arm of a big industrial robot lying on its side in the dirt: armoured segments, a hydraulic ram and a heavy three-fingered claw, for 40 mm and larger bases.
• Spur gear x2: A big steel spur gear lying flat, one tooth snapped off, with a shaft stub in its hub.
• Compound gear: A large gear with a small pinion gear cast on the same hub, as if pulled out of a gearbox.
• Broken gear x2: Half of a steel gear snapped across its hub, the break left jagged.
• Meshed cogs x2: Two small cogs lying flat with their teeth still meshed, rusted together.
• Girder offcut: A short steel I-beam with a torch-cut end, bolted splice plates and rows of rivets.
• Buckled girder: A long riveted I-beam bent sideways by a heavy blow, its flange crumpled at the bend.
• Girder heap: Two steel I-beams, one fallen across the other, with nuts and a bolt at their feet, for 40 mm and larger bases.
• Pipe ends x2: A flanged pipe stub torn off at the top, a broken pipe lying against it and a bolted blanking plate.
• Pipe junction x2: A cast-steel T-piece lying on its side, a raised flow arrow cast on top and a hex drain plug at the back, short pipe spools welded in, and weld-neck flanges at all three ends with six studs and nuts each (one nut gone, its stud snapped short).
• Bent plate: A riveted armour plate torn along one side, bent up along a fold and pocked by two bullet strikes.
• Plate shards x2: Two torn fragments of riveted plate, one fallen across the other.
• Nuts and bolts x3: Two big hex bolts and a handful of nuts lying where they were dropped, one nut stacked on another.
• Big hex bolt x3: One chunky threaded hex bolt with its nut, lying on its side.
• Engine piston x2: A big engine piston lying on its side, ring grooves round its crown, its connecting rod bent down to the ground with the bolted big end resting in the dirt.
• Generator: A squat skid-mounted generator in a framed enclosure: slanted louvre grille, a control panel with gauges, an emergency stop and switches, an access door with a T-handle and pressed louvres, lifting eyes and a strapped muffler with a perforated heat shield on top, one corner crumpled in.
• Junk heap: A pile of scrap: a torn plate with a gear lying on it, a wheel hub, a broken pipe and an I-beam fallen across them, for 40 mm and larger bases.
• Broken servo x2: A finned servo motor on its cast feet, its housing cracked, fins broken off and its output shaft snapped short.
• Cable drum: A big steel cable reel standing on its flanges, wound full of heavy six-strand wire rope, the loose end run out across the ground to a spliced eye round a thimble.
• Wrecked engine: A wrecked inline four-cylinder engine on its oil pan: cylinder head, bolted valve cover crumpled at one corner with four ignition coils and their wiring loom on top, exhaust manifold, starter motor, engine mount, oil filter, dipstick, torn intake runners and belt-driven pulleys, a centrepiece for 40 mm and larger bases.
• Gearbox: A heavy cast gearbox on four bolted feet, flanged along its split line, with bearing caps, a splined input shaft, an output flange and its gear lever snapped off.
• Power cell x2: A heavy upright power cell with bolted end caps, armour ribs, a clamp band, a window onto its stacked cells and two terminal posts on top.
• Crashed drone: A four-rotor drone crashed flat on the ground: an armoured hull with a battery pack strapped on top and its lens turret staring, three brushless motors with twisted propellers still on their carbon arms, the fourth arm torn through and its motor lying beside it.