Tank Trap Basing Bits, Pack of 22

Anti-tank obstacles for WW2, modern and sci-fi bases: steel Czech hedgehogs, concrete dragon's teeth, precast Jersey barriers, a knife rest and spike traps.

• 22 pieces in 18 designs, the smaller ones two or more to a pack
• Sizes from 7 to 39 mm, for 28mm figures (they suit 32mm too)
• Ships with all 22 pieces on one sprue (the 4th picture), in unpainted grey resin: snip free, glue, texture and paint
• Our own design, printed to order in our Perth workshop

22 pieces in 18 designs, all on one sprue:

• Czech Hedgehog: A Czech steel hedgehog of three thick riveted I-girders, standing on three ends.
• Hedgehog Pair: Two Czech steel hedgehogs, a big one and a smaller one, standing so close that their riveted girders cross and touch.
• Dragon's tooth x2: A three-step cast concrete dragon's tooth with board-marked faces, chipped edges, air holes and a top corner spalled off.
• Row of teeth: Three board-marked concrete dragon's teeth of rising height standing corner to corner, chipped and pitted.
• Small Hedgehog: A small, compact Czech steel hedgehog: three short riveted girders crossed at right angles, standing on three ends.
• Heavy Hedgehog: A big Czech steel hedgehog of three extra-thick riveted girders crossed at right angles, standing on three ends.
• Teeth line: Nine concrete dragon's teeth of mixed heights in a staggered double row, each touching its neighbours at the foot, for 60 mm bases and objectives.
• Knife Rest: A knife rest barricade: a barked log beam lying in the crotches of two X-shaped hewn timber trestles, bolted at the crossings and held by iron bands.
• Steel Tetrahedron: A riveted steel tetrahedron: three angle-iron legs welded under a heavy apex plate, tied at the feet by angle-iron braces.
• Large Hedgehog: A large Czech steel hedgehog of three long riveted girders crossed at right angles, standing on three ends.
• Jersey Barrier: A precast concrete Jersey barrier, smooth from its steel form, with chamfered edges, fork slots through its foot, lifting holes, a grout keyway at each end and chipped edges.
• Cracked Jersey Barrier: A Jersey barrier cracked right across its top and down both faces, two corners spalled and its faces pocked by splinters.
• Toppled Jersey Barrier: A Jersey barrier knocked over onto its side, resting on its edges with its fork slots and lifting holes showing.
• Concrete Block x2: A precast concrete cube block, smooth from its steel form, with two wire-rope lifting loops up out of pockets in its top, chamfered edges, air holes and chipped, spalled corners.
• Spike Strip: A flat steel bar with six round steel spikes, their points ground by hand, welded along it and leaning out alternately, and a countersunk peg hole at each end.
• Steel Caltrop x3: A heavy welded caltrop of four sharpened round steel bars, lying on three with the fourth pointing up.
• Angle-Iron Stakes: Three punched angle-iron stakes torch-cut to a point, leaning forward from an angle-iron sill that they are welded to.
• Spiked Plank: A heavy plank lying flat with seven iron spikes driven up through it, their points ground sharp.