28mm sculpt
Tree Stump Basing Bits, Pack of 25
25 resin tree stump basing bits in 14 designs for 28mm and 32mm bases. Designed in-house, printed to order in Perth, unpainted.
- Secure checkout We accept Visa, Mastercard, American Express, PayPal, Apple Pay, Google Pay and Shop Pay
- Printed to order Printed in resin in Perth
- Free AU shipping On orders of $50 or more. Standard shipping is $11 below that.
- Dispatch Unpainted orders usually leave within 3–5 business days, with tracking.
- Damaged or faulty? We replace it or refund you in full.
About this piece
Tree stumps for woods, clearings and battlefields: sawn, axe-felled, snapped, rotten, charred and lightning-split, all in deep sculpted bark.
- 25 pieces in 14 designs, the smaller ones two or more to a pack
- Sizes from 7 to 14 mm, for 28mm figures (they suit 32mm too)
- Ships with all 25 pieces on one sprue (the 4th picture), in unpainted grey resin: snip free, glue, texture and paint
- Our own design, printed to order in our Perth workshop
What you get
25 pieces in 14 designs, all on one sprue:
- Sawn Stump x2: Sawn-off tree stump with growth rings and a split across the cut top, deep furrowed bark.
- Jagged Broken Stump x2: Snapped tree stump with a ragged, splintered broken top and deep furrowed bark.
- Rooted Stump x3: Narrow sawn stump with growth rings on top, deep bark and short, thick roots that flare out and dive into the ground.
- Shell-Shattered Stump x2: Blasted stump from a shelled wood, shattered hollow top, stocky and solid, in deep furrowed bark.
- Short Sawn Stump x2: A low, wide stump sawn flat across the top, with growth rings, drying cracks and deep furrowed bark down to a short flared foot.
- Tall Sawn Stump: A tall, narrow stump with a slanted saw cut, growth rings on top and deep furrowed bark.
- Axe-Felled Stump x2: A stump felled with an axe from two sides: two sloping faces scalloped by overlapping axe bites, the growth rings cut faintly across them and a drying check, meeting at a ragged hinge of torn splinters across the top, in deep furrowed bark with roots flaring into the ground.
- Tall Splintered Stump: A tree snapped off high up, leaving three thick splintered points round a hollow of weathered growth rings, with deep bark and short roots flaring into the ground.
- Lightning-Split Stump: A tall stump split down the middle by lightning, both halves still joined at the foot, in deep furrowed bark.
- Rotten Stump x2: An old stump rotting from the heart out: a ring of sound wood split into weathered strands of different heights round a deep hollow whose walls are torn into stringy strands, floored with brown-rot blocks, one side broken down low, its furrowed bark flaking away in patches to grooved bare wood, thick, rounded roots running into the ground.
- Sawn Rooted Stump: A wide, low sawn stump with growth rings, deep bark and four short roots that flare out and dive into the ground.
- Sapling Stump x3: A small young tree cut off at an angle, with growth rings on the cut and furrowed bark; the smallest piece in the pack.
- Twin Stump: Two sawn trunks of different heights growing from one foot, with growth rings on both cuts and deep furrowed bark.
- Charred Stump x2: A burnt stump, its bark charred into irregular alligator blocks with deep, narrow cracks, its broken top burnt down unevenly with the end grain cracked along the rings and radial checks, the heart burnt out into a hollow of crumbly charcoal checking and two burnt stubs of the outer wood standing up on one side.
Designed by Scale Command
Scale Command
Our own designs, made in our Perth workshop: the Paint Hive range of honeycomb paint racks that join together, texture rollers for bases and terrain, plain resin bases and movement plates in the standard sizes, movement trays for ranked units and resin basing bits for 28mm (crystals, basalt, sandbags, skulls and more). We design each piece ourselves and print it to order.
Specs
The piece
- What you get
- 25 resin tree stump basing bits in 14 designs
- Material
- ResinResin vs filament: why we print it this way
- Arrives
- Printed, washed, cured and ready to prime
- Designer
- Scale Command
Shipping & returns
Shipping
Printed to order in our Perth workshop on our own printers. Usually ships within 3–5 business days, always with tracking. Free shipping in Australia on orders of $50 or more.
Shipping rates and timesReturns
Damaged or faulty? We replace or refund it. For change-of-mind returns, see our returns policy.
How returns workLicensing
Independent and unofficial
This is an original design from Scale Command, made for hobby use and display. It isn't made, licensed or endorsed by any game company, it isn't connected to any game, brand or ruleset, and we don't sell it as compatible with any particular game system. Where a game, trade mark, photo or file is mentioned for scale, inspiration or context, it belongs to its owner and we claim no rights in it.
Meet our designersReviews
New shop, first reviews on the way
Only customers who bought this model can leave a review. Every reviewer gets $5 off their next order, whatever they say; add a photo of your painted models or bases for $10 off. We want your honest experience, good or bad.
We opened on 6 November 2026, so the first reviews are still coming in. Reviews come only from customers who bought this model: we email you a link after your order is delivered.
Complete the set
Every pack is sculpted for 28mm and printed the same way.
-
New
-
New
-
New
-
New
Bits for every base
Crystals, basalt, sandbags, skulls, rocks and more, designed in-house for 28mm. Each pack ships on its print sprue in grey resin: snip the pieces free, glue them on, add sand and paint.
See all Basing Bits & Plates











































